All Products

Cascade is a universal 60% USB-C PCB designed to support the most common layouts used. It features RGB underglow, JST support, and is QMK/VIA compa...

A Pro Micro replacement with USB-C? Heck yeah! These little breakout boards are a must for any board without a SMD microcontroller such as the Dact...

An improvement from standard Gateron Yellows. The fully Milky switches feature a smoother and deeper sounding housing than their clear/black brethr...

An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.

SPRiT Kailh BOX springs are springs for BOX switches. And the 24K gold ones help to reduce ping apparently. Andy didn't tell me much about these so...

Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.

Plate mount stabilizers from Durock. Nice and smooth. These require a clip and lube for optimal sound and smoothness. Each kit comes with 1 x 6.25U...

Please note that there is a 1 week lead time on these for the time being (March 17 2022). Relive the glory days of vintage electronics with the A...

High quality paint brushes in size 0 and 00 for lubing your switches and stabilizers. These won't shed or leave little fibers on your switch parts ...

These rubber foams from Deskeys are the gold standard for switch films. These are thick (0.3 mm) films that act as a gasket to deepen the sound in ...

I'm happy to bring back the Paladin64 ALPS PCB! This revamped edition designed by Nachie of KapCave is exclusive to RNDKBD in Canada! 60% Layout A...

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders.

Restock expected in late April. Sold in packs of 10. Aflion Melody switches are a light tactile with a high (almost no pre-travel) smooth and round...

A USB-C to JST daughterboard for boards like the Bakeneko60, Nue, HBCP and others that break out the USB from the main PCB. 20 cm (8 in) JST cable ...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

TriboSys 3204 is the middle ground between your thick (205g0) and thin (3203) lubricants! This stuff works wonders on linears and tactiles alike, a...

This nifty tool grabs your stems and gives you a pencil-like tool to hold on to while lubing. No more holding stems awkwardly with your fingers - m...

A 1.2mm FR4 plate for ALPS switches in the AEK layout. Has typical plate mount holes for boards like the ADK64. Pair it with the Paladin64 for a mo...

Sold in packs of 10. These are the new cherry MX retool announced at CES 2020. They feature tighter tolerances and an improved contact leaf - which...

A Universal FR4 plate for MX switches. Has tray mount points for cases like the ADK64, as well as cutouts to accommodate the layouts in the DZ60 an...

In stock and shipping now. Sold in packs of 10. Aflion Runner switches are a medium-heavy tactile with a super round and delicious bump like U4Ts, ...

These backers drastically reduce/eliminate gantry sag on your Voron printer. A must have for those looking to achieve perfection on their prints. Y...

Crocheted keyboard cases crafted right here at RNDKBD. Made to order, custom sleeves for easy transport of your keyboards. Protect your shiny new k...

Greater sound dampening and even more buttery smoothness than 205g0. GHv4* is an 206g2 and 106 mixture (7:3) that is popular in the Korean mech sce...

Kinematic bed mounts by whoppingpochard - designed to combat the effects of thermal expansion. Check out the science on Github here.

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

SPRiT MX Slow Extreme V springs are longer than your typical springs and feature a higher starting force. Perfect for gamers and typists who want t...

Out of stock until Daughterboards come in. The PLAneko60 is a 3D-printed Hotswap Bakeneko style board with an O-ring/gummy mounting style. Each kit...

Genuine ALPS rotary encoder for use on boards like the PLAPad. 6mm D-shaft 18 steps per revolution (smooth rotation) Pulse on top-press Knobs sol...