Titanium Extrusion Backers for Voron 2.4 & Trident

These backers drastically reduce/eliminate gantry sag on your Voron printer. A must have for those looking to achieve perfection on their prints.

Y-Backers thickness: 3 mm
X-Backer thickness: 2 mm

Includes the required screws & Torx driver (you have to provide the T-nuts). I opted for Torx as hex FHCS like to cam out/strip - it's a few dollars more, but you'll never strip a screw and have a backer stuck on your printer.

Based on the amazing work by whoppingpochard - check out the Github repo with all the science here.