$5 Bubble Mailer Items

205g0 is a high viscosity PTFE grease used to lubricate MX style switches. It is known by keyboard enthusiasts as the undisputed champ for smooth l...

I got a lot of feedback in the design process for these, and I believe they are better thought out than a lot of the acrylic ones out there.  Stem...

Thin lubricant, best used in tactiles or for those that like a lighter linear. Recommended by Gazzew for those that want to lube their U4Ts. Need a...

High quality paint brushes in size 0 and 00 for lubing your switches and stabilizers. These won't shed or leave little fibers on your switch parts ...

GPL 105 is a low viscosity synthetic PFPE oil recommended for use on springs and linear switches. Either donut-dip or bag lube your springs using a...

A handy 3D printed plate fork to aid in the assembly of a board. Place this tool between your plate and PCB to ensure switches clip in to your plat...

These 0.5mm foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switch...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

A must have for hotswap board owners! These pullers are handy tools that help remove hotswap switches from plates. It works by depressing the locki...

Proudly display your collection with our display stands. Sturdy enough to hold large keyboards with metal weights. Collapsible for storage when not...

A new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...

This nifty tool grabs your stems and gives you a pencil-like tool to hold on to while lubing. No more holding stems awkwardly with your fingers - m...

An assortment of switches for those who would like to sample some of our offerings! Includes an MX Switch Opener so you can mix and match springs t...

Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.

Greater sound dampening and even more buttery smoothness than 205g0. GHv4* is an 206g2 and 106 mixture (10:3) that is popular in the Korean mech sc...

An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders. BHCS M3x10 titanium Rainbow anodized screws ...

O-rings are red/orange color. AS568-262 size oring for Bakeneko60 style boards. 50A hardness. No fancy colors, but you don't see it and it works al...

TriboSys 3204 is the middle ground between your thick (205g0) and thin (3203) lubricants! This stuff works wonders on linears and tactiles alike, a...

Sold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) These are a budget alternative to Mill-M...

Use this tool to shave off the bumps on switch stems such as Cherry MX Clear and MX Purple so they won't stretch your keycaps.

Are you stuck between a couple of color options? Want to see how close a color match our printed boards will be? If our Filament Catalog isn't quit...