A handy 3D printed plate fork to aid in the assembly of a board. Place this tool between your plate and PCB to prevent flimsier or tighter plates f...View full details
Bring some stability to your life (and keyboards) with these Durock V2 Stabilizers. These upgraded stabilizers have an improved wire clip to preven...View full details
A great sounding alternative to polycarbonate stabilizers, without the scratch of the GMK screw ins (sad face). These are genuine Cherry stabilizer...View full details
Sold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) Make your solder board into a hotswap on...View full details
A USB-C to JST daughterboard for boards like the Bakeneko60, Nue, HBCP and others that break out the USB from the main PCB. 15 cm (6 in) JST cable ...View full details
I got a lot of feedback in the design process for these, and I believe they are better thought out than a lot of the acrylic ones out there. Stem...View full details
MDI (PU/Polyurethane) Switch films from Kelowna. These are thick (0.3 mm) films that act as a gasket to deepen the sound in your switches and reduc...View full details
These foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switches for...View full details
A handy dandy tool to remove hotswap switches from plates. A must have for hotswap board owners!
A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers.
An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.
Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.
These Durock films are placed between the top and bottom housing of an MX switch to tighten the connection and reduce housing wobble. They also hel...View full details