Extra Tops and Plates

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra top for your PLA75 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra top for your PLAPad.

An extra FR4 Plate for the PLA60. Supports split backspace, stepped caps, split right shift, 7U HHKB, WKL and WK and Tsangan. No split space suppor...

A 1.2 mm plate to accommodate ALPS switches in the AEK 60% layout for the PLA60. Pair it with the Paladin64 PCB for a modern ALPS board. Do it. You...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

A 1.2mm FR4 plate for ALPS switches in the AEK layout. Has typical plate mount holes for boards like the ADK64. Pair it with the Paladin64 for a mo...

A Universal FR4 plate for MX switches. Has tray mount points for cases like the ADK64, as well as cutouts to accommodate the layouts in the DZ60 an...

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders.