RNDKBD

A 1.2mm FR4 plate for ALPS switches in the AEK layout. Has typical plate mount holes for boards like the ADK64. Pair it with the Paladin64 for a mo...

A Universal FR4 plate for MX switches. Has tray mount points for cases like the ADK64, as well as cutouts to accommodate the layouts in the DZ60 an...

Please note that there is a 1 week lead time on these for the time being (March 17 2022). Relive the glory days of vintage electronics with the A...

An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.

A simple switch opener with two magnetic halves that can open MX and BOX switches. Closes up into a neat little box for storage. For a cheaper opti...

A simple PCB to power up to three fans off a single header - useful for the bed fan mod to quickly heat your chamber. Check out the Github for more...

Sold in packs of 10, minimum order is 30 switches (3 packs of 10). Orders with less than this will be cancelled according to the return policy.  C...

In stock! Cherry MX Slick Clicks are a (total meme) 5-pin MX Green or Blue that has been mechanically actuated 640,000+ times to 'break in' the sw...

Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.

Have a board that you'd like a wrist rest for? I can design and print a bespoke wrist rest for your board! For questions please contact me at andy@...

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders.

A handy dandy tool to remove hotswap switches from plates. A must have for hotswap board owners!

We've teamed up with our good friends at KapCave to bring you a 3D printed Artisan box! Safely store your beauties in this magnetically sealing box...

Krytox™ GPL 105 is a low viscosity synthetic PFPE oil recommended for use on springs and linear switches. Either donut-dip or bag lube your springs...

Krytox™ 205g0 is a high viscosity PTFE grease used to lubricate MX style switches. It is known by keyboard enthusiasts as the undisputed champ for ...

A new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...

I got a lot of feedback in the design process for these, and I believe they are better thought out than a lot of the acrylic ones out there.  Stem...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

An assortment of switches for those who would like to sample some of our offerings! This list cannot be customized. The switches are pre-packed to ...

A 1.2 mm plate to accommodate ALPS switches in the AEK 60% layout for the PLA60. Pair it with the Paladin64 PCB for a modern ALPS board. Do it. You...

Big Flexin'. That is all.  A half plate decouples the alpha switches from the plate to allow for more bounce and flex when typing. Comes with adhes...

An extra FR4 Plate for the PLA60. Supports split backspace, stepped caps, split right shift, 7U HHKB, WKL and WK and Tsangan. No split space suppor...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

Finally. Small form factor with arrow keys. 12 Poron Gaskets isolate the FR4 plate from the 3D printed housing to create a unique and extremely tho...

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

Please note that there is a 1 week lead time on these for the time being (March 17, 2022). See all color options on the Filament Colors page! Note ...

An extra top for your PLA75 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

1 week lead time on these. This is just the PLAneko60 case (compatible with other bakeneko60 hardware that uses an 8 point gummy mount). The full k...

1 week lead time on these. The PLAneko60 is a 3D-printed Hotswap Bakeneko style board with an O-ring/gummy mounting style. Each kit includes an FR...

One week lead time for PLAPads. A perfect companion to your PLA60/65/75 board! The PLAPad is a 3D printed gasket mount (because why not) numpad mad...