Shipping Worldwide
Shipping Worldwide
Bring some stability to your life (and keyboards) with these Durock V2 Stabilizers. These upgraded stabilizers have an improved wire clip to preven...
View full detailsSPRiT MX Slow Extreme II springs are longer than your typical springs and feature a higher starting force. Perfect for gamers and typists who want ...
View full detailsTry out a whole lot of springs without having to buy a ton of individual packs! Includes a 3D printed case with an collection of springs. Colors of...
View full detailsThin lubricant, best used in tactiles or for those that like a lighter linear. Recommended by Gazzew for those that want to lube their U4Ts. Need a...
View full detailsSold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) Make your solder board into a hotswap on...
View full detailsAnnounced in March 2021, these springs have a lighter linear force until actuation and then it becomes heavier. They make for snappy linears that a...
View full detailsA new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...
View full detailsReplacement springs for your ALPS. These are just plain ol' linear springs, just as they were in vintage ALPS switches. They are within 0.5% deviat...
View full detailsSPRiT MX Slow Extreme III springs are longer than your typical springs and feature a higher starting force. Perfect for gamers and typists who want...
View full detailsMX Progressive springs follow an exponential force curve. They start light and get exponentially heavier as you approach bottom out. They are highl...
View full detailsA Pro Micro replacement with USB-C? Heck yeah! These little breakout boards are a must for any board without a SMD microcontroller such as the Dact...
View full detailsSPRiT MX Complex springs follow a exponential force curve up until actuation, and then switch to linear until bottom out. Sprit springs are within ...
View full detailsReplacement springs for Kailh BOX switches. They are within 0.5% deviation as of October 2020. 24K Gold Plated available for 60g, 65g, and 70g.
A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders. BHCS M3x10 titanium Rainbow anodized screws ...
View full detailsTriboSys 3204 is the middle ground between your thick (205g0) and thin (3203) lubricants! This stuff works wonders on linears and tactiles alike, a...
View full detailsAS568-262 size o-ring for Bakeneko60 style boards. 30A hardness (soft) for extra bounce. No fancy colors, but you don't see it and it works all the...
View full details$150.00 CAD away from free shipping!