$5 Bubble Mailer Items

Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.

MX Progressive springs follow an exponential force curve. They start light and get exponentially heavier as you approach bottom out. They are highl...

The new Durock V3 PCB-mount screw in stabilizers feature an updated stem with an elastic support base to keep the wire secure, resulting in no ratt...

SPRiT MX Slow Extreme V springs are longer than your typical springs and feature a higher starting force. Perfect for gamers and typists who want t...

Greater sound dampening and even more buttery smoothness than 205g0. GHv4* is an 206g2 and 106 mixture (10:3) that is popular in the Korean mech sc...

An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.

The newest iteration of TX's excellent stabs is the "AP" version, or "Almost Perfect". By making the housing thicker and rounder, you have less wob...

Replacement springs for Kailh BOX switches. They are within 0.5% deviation as of October 2020.

SPRiT MX Complex springs follow a exponential force curve up until actuation, and then switch to linear until bottom out. Sprit springs are within ...

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders. BHCS M3x10 titanium Rainbow anodized screws ...

TriboSys 3204 is the middle ground between your thick (205g0) and thin (3203) lubricants! This stuff works wonders on linears and tactiles alike, a...

O-rings are red/orange color. AS568-262 size oring for Bakeneko60 style boards. 50A hardness. No fancy colors, but you don't see it and it works al...

SPRiT MX Slow Extreme IV springs are longer than your typical springs and feature a higher starting force. Perfect for gamers and typists who want ...

Made with a soft compressing Polyurethane foam, these switch films are placed between the top and bottom housing of an MX switch to tighten the con...

Sold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) These are a budget alternative to Mill-M...

These polycarbonate TX films are placed between the top and bottom housing of an MX switch to tighten the connection and reduce housing wobble. The...

Use this tool to shave off the bumps on switch stems such as Cherry MX Clear and MX Purple so they won't stretch your keycaps.

Are you stuck between a couple of color options? Want to see how close a color match our printed boards will be? If our Filament Catalog isn't quit...