All Products

2023/01/23 - All gone. Stay tuned for the next chapter of broken-in switches! The original broken-in Cream switch! RNDKBD Whipped Creams are Kailh ...

205g0 is a high viscosity PTFE grease used to lubricate MX style switches. It is known by keyboard enthusiasts as the undisputed champ for smooth l...

Sold in packs of 10, minimum order is 30 switches (3 packs of 10). Orders with less than this will be cancelled according to the return policy.  T...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

Thin lubricant, best used in tactiles or for those that like a lighter linear. Recommended by Gazzew for those that want to lube their U4Ts. Need a...

A handy 3D printed plate fork to aid in the assembly of a board. Place this tool between your plate and PCB to prevent flimsier or tighter plates f...

GPL 105 is a low viscosity synthetic PFPE oil recommended for use on springs and linear switches. Either donut-dip or bag lube your springs using a...

Note: Canada Bubble mailers can only contain a single stand. Please use parcel shipping for multiple. US Bubble mailers can have multiple. Flex har...

These 0.5mm foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switch...

A handy dandy tool to remove hotswap switches from plates. A must have for hotswap board owners! Made from black anodized aluminum.

A new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...

An assortment of switches for those who would like to sample some of our offerings! This list cannot be customized. The 11 switches are pre-packed ...

A simple switch opener with magnetic caps that can open MX and BOX switches. Closes up into a neat little box for storage. For a cheaper option, ch...

An easy to use ALPS switch opener - a single one should last forever, and they work great. Credit to Andrew Bishop for the design.

Crack open your chocs with this tool. The cylinder is used to eject the switch bottoms from the claws.

Please note that there is a 1 week lead time on these for the time being (March 17 2022). Relive the glory days of vintage electronics with the A...

High quality paint brushes in size 0 and 00 for lubing your switches and stabilizers. These won't shed or leave little fibers on your switch parts ...

A simple 3D printed knob for D-Shaft encoders with a knurl. Compatible with all EC11 D-shaft encoders.

A USB-C to JST daughterboard for boards like the Bakeneko60, Nue, HBCP and others that break out the USB from the main PCB. 20 cm (8 in) JST cable ...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

TriboSys 3204 is the middle ground between your thick (205g0) and thin (3203) lubricants! This stuff works wonders on linears and tactiles alike, a...

This nifty tool grabs your stems and gives you a pencil-like tool to hold on to while lubing. No more holding stems awkwardly with your fingers - m...

A 1.2mm FR4 plate for ALPS switches in the AEK layout. Has typical plate mount holes for boards like the ADK64. Pair it with the Paladin64 for a mo...

A Universal FR4 plate for MX switches. Has tray mount points for cases like the ADK64, as well as cutouts to accommodate the layouts in the DZ60 an...

Greater sound dampening and even more buttery smoothness than 205g0. GHv4* is an 206g2 and 106 mixture (7:3) that is popular in the Korean mech sce...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

Out of stock until Daughterboards come in. The PLAneko60 is a 3D-printed Hotswap Bakeneko style board with an O-ring/gummy mounting style. Each kit...

An extra top for your PLA75 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

Expected to fulfill on or about April 12. New for 2023The newest iteration of TX's excellent stabs is the "AP" version, or "Almost Perfect". By mak...

AS568-262 size o-ring for Bakeneko60 style boards. 30A hardness (soft) for extra bounce. No fancy colors, but you don't see it and it works all the...