Products

GPL 105 is a low viscosity synthetic PFPE oil recommended for use on springs and linear switches. Either donut-dip or bag lube your springs using a...

205g0 is a high viscosity PTFE grease used to lubricate MX style switches. It is known by keyboard enthusiasts as the undisputed champ for smooth l...

A must have for hotswap board owners! These pullers are handy tools that help remove hotswap switches from plates. It works by depressing the locki...

We've teamed up with our good friends at KapCave to bring you a 3D printed Artisan box! Safely store your beauties in this magnetically sealing box...

Proudly display your collection with our display stands. Sturdy enough to hold large keyboards with metal weights. Collapsible for storage when not...

These devices are used to safely pull off keycaps without damaging your caps or switches.

A new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...

High quality paint brushes in size 0 and 00 for lubing your switches and stabilizers. These won't shed or leave little fibers on your switch parts ...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

An assortment of switches for those who would like to sample some of our offerings! Includes an MX Switch Opener so you can mix and match springs t...

O-rings are clear/translucent color. AS568-262 size o-ring for Bakeneko60 style boards. 50A hardness. No fancy colors, but you don't see it and it ...

These 0.5mm foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switch...

A 3D printed stand with charging cutouts for your phone. Collapsible to easily fit in your bag.

A 1.2 mm plate to accommodate ALPS switches in the AEK 60% layout for the PLA60. Pair it with the Paladin64 PCB for a modern ALPS board. Do it. You...

An extra FR4 Plate for the PLA60. Supports split backspace, stepped caps, split right shift, 7U HHKB, WKL and WK and Tsangan. No split space suppor...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...