Products

A must have for hotswap board owners! These pullers are handy tools that help remove hotswap switches from plates. It works by depressing the locki...

We've teamed up with our good friends at KapCave to bring you a 3D printed Artisan box! Safely store your beauties in this magnetically sealing box...

MDI (EVA) Switch films from Kelowna. These are thick (0.3 mm) films that act as a gasket to deepen the sound in your switches and reduce wobble. Th...

Proudly display your collection with our display stands. Sturdy enough to hold large keyboards with metal weights. Collapsible for storage when not...

These devices are used to safely pull off keycaps without damaging your caps or switches.

A new alternative to the unnecessary space-grade lubes in the keyboard world. This was dreamed up by Gazzew as a high performance lubricant for bot...

High quality paint brushes in size 0 and 00 for lubing your switches and stabilizers. These won't shed or leave little fibers on your switch parts ...

Sold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) Make your solder board into a hotswap on...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

I'm happy to bring back the Paladin64 ALPS PCB! This revamped edition designed by Nachie of KapCave is exclusive to RNDKBD in Canada! 60% Layout A...

These 0.5mm foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switch...

A 3D printed stand with charging cutouts for your phone. Collapsible to easily fit in your bag.

A 1.2 mm plate to accommodate ALPS switches in the AEK 60% layout for the PLA60. Pair it with the Paladin64 PCB for a modern ALPS board. Do it. You...

An extra FR4 Plate for the PLA60. Supports split backspace, stepped caps, split right shift, 7U HHKB, WKL and WK and Tsangan. No split space suppor...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...