Products

I got a lot of feedback in the design process for these, and I believe they are better thought out than a lot of the acrylic ones out there.  Stem...

Sold in packs of 10. Remember, you need 2 of these per switch! (Order 130-140 pcs for a 60% keyboard etc.) Looking for a budget alternative? Check ...

A handy little device to open up MX style switches. Much faster than fumbling around with 2 screwdrivers. For a more premium option, check out our ...

An assortment of switches for those who would like to sample some of our offerings! The Gazzew+ Pack includes an MX Switch Opener so you can mix an...

The new Durock V3 PCB-mount screw in stabilizers feature an updated stem with an elastic support base to keep the wire secure, resulting in no ratt...

O-rings are red/orange color. AS568-262 size oring for Bakeneko60 style boards. 50A hardness. No fancy colors, but you don't see it and it works al...

By purchasing this PCB you acknowledge the PCB return/replacement policy in our Terms. I'm happy to bring back the Paladin64 ALPS PCB! This revampe...

These 0.5mm foam pads help dampen the sound profile of your keyboard by isolating the switch from the PCB. Place these down before inserting switch...

A 3D printed stand with charging cutouts for your phone. Collapsible to easily fit in your bag.

A 1.2 mm plate to accommodate ALPS switches in the AEK 60% layout for the PLA60. Pair it with the Paladin64 PCB for a modern ALPS board. Do it. You...

An extra FR4 Plate for the PLA60. Supports split backspace, stepped caps, split right shift, 7U HHKB, WKL and WK and Tsangan. No split space suppor...

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

An extra top for your PLA75 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

1 week lead time on these. This is just the PLAneko60 case (compatible with other bakeneko60 hardware that uses an 8 point gummy mount). The full k...

The PLAneko60 is a 3D-printed Hotswap Bakeneko style board with an O-ring/gummy mounting style. Each kit includes an FR4 full plate, Cascade Hotswa...

One week lead time for PLAPads. A perfect companion to your PLA60/65/75 board! The PLAPad is a 3D printed gasket mount (because why not) numpad mad...