Products

Little brothers are the best - so I figured the PLA75 needed one. The 3D printed PLA60 uses 12 adhesive Poron gaskets instead of the typical gasket...

An extra top for your PLA60 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

An extra FR4 Plate for the PLA65. Supports split backspace, stepped caps, and split right shift. Fixed 6.25U bottom row.

An extra top for your PLA65 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

A fixed layout plate for hotswap boards. Existing PLA75 FR4 plates should work fine as well. Bourgeau PCB information is here.

Universal plate for the PLA75. One size fits all, is also backwards compatible with the PLA75 R1 case. Supports all layouts in the KLE, I've found ...

An extra top for your PLA75 board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filamen...

1 week lead time on these. This is just the PLAneko60 case (compatible with other bakeneko60 hardware that uses an 8 point gummy mount). The full k...

The PLAneko60 is a 3D-printed Hotswap Bakeneko style board with an O-ring/gummy mounting style. Each kit includes an FR4 full plate, Cascade Hotswa...

One week lead time for PLAPads. A perfect companion to your PLA60/65/75 board! The PLAPad is a 3D printed gasket mount (because why not) numpad mad...

An extra top for your PLAPad.

A handy 3D printed plate fork to aid in the assembly of a board. Place this tool between your plate and PCB to ensure switches clip in to your plat...

These cases are printed to order. Please allow for up to a 1 week lead time. A seamless 3D printed TKL with a single top and bottom piece. Fantasti...

An extra top for your PLATKL board. Includes embedded nuts - you will need to reuse the original bottom screws from your kit though. See the Filame...

Add Route at checkout to protect your package against loss, theft and damage, and make shipping 100% carbon neutral. Visit route.com/s...

Try out a whole lot of springs without having to buy a ton of individual packs! Includes a 3D printed case with an collection of springs. Colors of...

Replacement springs for your ALPS. These are just plain ol' linear springs, just as they were in vintage ALPS switches. They are within 0.5% deviat...

Replacement springs for Kailh BOX switches. They are within 0.5% deviation as of October 2020.   24K Gold Plated available for 60g, 65g, and 70g.

Replacement springs for Kailh Choc switches. SPRiT springs are within 0.5% deviation as of Oct 2020. If the weight you want is out of stock, order ...

SPRiT MX Complex springs follow a exponential force curve up until actuation, and then switch to linear until bottom out. Sprit springs are within ...

Announced in March 2021, these springs have a lighter linear force until actuation and then it becomes heavier. They make for snappy linears that a...

MX Progressive springs follow an exponential force curve. They start light and get exponentially heavier as you approach bottom out. They are highl...